What I was planning to do is use it to get power to the spark gap, MMC, and coil, perhaps even as the coil.
Regards
James Janota
(727)512-7112 Phone
(727)595-6625 Fax
> On Sep 2, 2019, at 20:56, derstrom8--- via Tesla <tesla@xxxxxxxxxx> wrote:
>
> Hello James,
>
> In what context? 10AWG wire is used as a conductor all over the place. Solid 10 gauge is usually good for around 50 amps, whereas stranded 10 gauge is usually good for between 15 and 30 amps, depending on the number of cores (more cores = less current capacity). Stranded will bend more easily and will be less susceptible to breaking. Solid wire will break more easily if bent multiple times in the same spot.
>
> So yes, 10 gauge wire will work great as a conductor, but be aware of its limitations. It may not work in all applications.
>
> A more specific question will yield a more specific answer.
>
> Best,
> Matt Lewis, Fairlee VT
>
>
> -----Original Message-----
> From: James Janota via Tesla <tesla@xxxxxxxxxx>
> To: tesla <tesla@xxxxxxxxxx>
> Sent: Mon, Sep 2, 2019 8:48 pm
> Subject: [TCML] Wire question.
>
> Can I use 10AWG as a conductor!
>
> Regards
>
> James Janota
> (727)512-7112 Phone
> (727)595-6625 Fax
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla