I worked in powder coating for 4 years. I can do it all for free, at my
leisure. Hence why I was curious about it. Plus the Silver hammertone
powder is suuuuppper sexy. I have two nsts with one of hv ends shorted I'll
test it out on first. I'm glad to hear 20-40 minutes wouldn't start the tar
melting, but am slightly concerned with the brought up heat absorbtion... I
suppose like all tinkerers, i'm going to have to put the math aside and
just do it.
On Wed, Jan 16, 2019, 4:39 PM Daniel Kunkel <dankunkel@xxxxxxxxx wrote:
> Jeremiah,
> Why not save money and just use regular paint? I have been hooked on
> painting things with a hammered finish lately.
>
> https://www.amazon.com/dp/B0002YVWJW/ref=twister_B07FYRW8QP?_encoding=UTF8&th=1
>
> If you are really stuck on the powder coat, then at least send a dead NST
> through the process first. You don't even need to coat it and pay for it.
> Surely they would let you stick in a plain NST in the oven for free just to
> see if it survives.
>
>
> ~Dan (yes I painted my kids pinewood derby car in gold hammered finish)
> Kansas City area
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla