When I built my phase controller, I used an LED. Even the florescent tubes allows one to barely see the phasing, but the LED next to reference mark on the wheel worked better.
-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Daniel Kunkel
Sent: Sunday, October 21, 2018 10:38 PM
To: Tesla list <tesla@xxxxxxxxxx>
Subject: **External Email** [TCML] SRSG strobe
I'm getting ready to build my phase controller to control my new SRSG. I thought I've heard of others use an automotive ignition timing light to strobe and watch the phasing, but I can't get mine to trigger off a 60Hz source. Can anyone offer some advice here?
~Dan
Kansas City area
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
This email and any attachments are for the sole use of the intended recipient(s) and may contain confidential information. If you receive this email in error, please notify the sender, delete the original and all copies of the email and destroy any other hard copies of it.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla