Yes I do actually,I can't seem to send the video or pictures though, I
get an email saying undelivered mail returned to sender. I'm not quite
sure how to send them to you. Normally I can send things by email just
fine.
It is very nice having the sparks away from the primary coil and power
supply.
This system actually started out as a 2 coil system with a flat pancake
primary. I just built the new primary and secondary and used the old
secondary as the extra coil.
It seemed like I gained about 2 inches of spark length but I think
that's probably because of a change in overall system coupling.
As I mentioned before, the sparks got noticeably brighter! I'm not sure
why.
I can send you all the specs If you would like.
Benjamin
On 2018-03-07 19:01, Jay Howson LAST_NAME wrote:
> I was planning on making my next coil a magnifier (easier to move just the secondary into the yard rather then the whole thing)
>
> Got any video's of yours?
>
> Cheers,
> John "Jay" Howson IV
>
> "Why thank you, I will be happy to take those electrons off your hands."
>
>> On March 7, 2018 at 8:59 PM benjaminlockhart@xxxxxxxxxxx wrote:
>>
>> I built a 2 MOT magnifier a while ago that has produced 5 foot sparks
>> from a 3.5 inch by 22 inch extra coil wound with 24 gauge wire. I'm
>> wondering why I don't see more people experimenting with this amazing
>> type of system.
>>
>> As far as I know there isn't any spark length improvement over a
>> standard 2 coil system, but it has been my experience that the sparks
>> are much hotter and thicker.
>>
>> Benjamin Lockhart
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxxxxxx
>> https://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla