[Home][2018 Index] Re: [TCML] Fixing secondary strikes Re: Bad strike to a 12 inch traditional coil (somewhat terminal) [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Fixing secondary strikes Re: Bad strike to a 12 inch traditional coil (somewhat terminal)



I suspect that the text in the video stated it was an open ring just
because there may be viewers who might not be aware that it is important to
do so.  Just trying to spread the word.

Regards, Gary Lau
MA, USA

On Sat, Jul 7, 2018 at 7:45 PM, Tedd Dillard <tedd.dillard@xxxxxxxxx> wrote:

> Gentlemen the reasons for my question are;
> 1. I am new at this so am trying to understand how these things work. They
> are obviously complicated so getting into details is important.
> 2. In reading past post I remember some discussion on strike rings that
> included some reference to open and closed loop rings but I was not clear
> on the issue.
> 3. In the video of the damage to the secondary one of the captions
> indicated an open loop strike ring so I wondered if there was any
> significance to specifying that it was open loop. If no one runs closed
> loop why say it was open?
> Teddy
> <snip>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla