[Home][2018 Index] Re: [TCML] Secondary Coil Wiring [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Secondary Coil Wiring



My recommendation is to buy a 10 lbs spool (possibly already used), use
what you need, then sell it on eBay. Yes, the wire should be enameled
already. The difference in enamel rating is usually temperature. The
additional coating you add just gives so physical robustness and additional
voltage insulation to the coil.

On Mon, Jan 8, 2018 at 1:10 AM, YESN via Tesla <tesla@xxxxxxxxxx> wrote:

> Hey,
>
> Does anyone know good places to buy wiring? I can’t seem to find enough
> metres, they all sell 20-67 metres while I need somewhere around 400. The
> diameter I am going to use is 0,4 mm.
> (Perhaps stupid question but: the wiring needs to already have a coating
> right? And is it recommended to coat the entire coil afterwards?)
>
> Yesn
>
> Sent from ProtonMail Mobile
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla