[Home][2018 Index] Re: [TCML] VTTC tank capacitor [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] VTTC tank capacitor



Here are the specs on the transformer I use with my dual 833a.   Also a
voltage doubler.

Bud

On Feb 23, 2018 2:43 AM, "Chris Reeland" <chrisreeland@xxxxxxxxx> wrote:

> Hi Bud,
>
> I don't mean to change topics here too much, but I have watched a few
> different videos of yours in the past, including this one. Nice work. I
> want to ask a question on your tube coil. Is your very nice plate trans a
> Peter W. Dahl Co. ? It sure looks like one. Could you give some specs on
> that nice fella? Just curious. Also are you level shifting the output?
>
> Me on a current 3-500ZG pulsed coil project, I am using a fairly big old
> Stancor plate trans. It is a P-8035. Good for 5900vac at 115 or 230vac
> input. Has a fairly decent amount of iron, about 80lbs.
>
> Chris
>
> Sent from my LG V20
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla