[Home][2018 Index] [TCML] Bleeder resistor for Maxwell cap [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Bleeder resistor for Maxwell cap

To: tesla@xxxxxxxxxx
Subject: [TCML] Bleeder resistor for Maxwell cap
From: dennis otmaskin <dotmaskin@xxxxxxxxx>
Date: Wed, 7 Feb 2018 13:40:35 -0500
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxxxxxxxxxx
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:from:date:message-id:subject:to; bh=ZPrn2zu3seYHiMNoGgIsFTvrYi4Zt03yCgv3M0OTmcg=; b=T5QsixurXeZtidVlSwaIl041tBBorMsjbkiCEMs7oDAOipp0CSmEotZKpUAPZXSbb6 tyyyfIxHAz/GtgdvWAcc5Az6heJ1PuZFZrTGzrllpJzcnmjlH2tWfersUXpo0BhqBKQq BBRoYWNRbL0cJ1kk1JUsVTdW+8pejtpuHRCelx5yB7xSCdOBeZyr+HaX/XVTmo5U94DP cmhkDKG76Scn373esqzgbqZBmIZKDaMqB3Np0+3Kw1z9P9togX3s6qPzOabuO6t2PJaq OiVAj1jN3xjBvKCWAbTEzjBi30RvXIkphbJq2vQuDzdvsaHGLmI93pZILJfRbhX8F2kM YFPQ==
List-archive: <https://www.pupman.com/pipermail/tesla/>
List-help: <mailto:tesla-request@tedward.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.tedward.pupman.com>
List-post: <mailto:tesla@tedward.pupman.com>
List-subscribe: <https://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@tedward.pupman.com?subject=subscribe>
List-unsubscribe: <https://www.pupman.com/mailman/options/tesla>, <mailto:tesla-request@tedward.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: "Tesla" <tesla-bounces@xxxxxxxxxx>

I would appreciate some guidance on the proper bleeder resistor for a 35kV
.003uF Maxwell pulse capacitor (#367667) or where I can go to find this
info.  Thank you!

Dennis, Hopkinton MA
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Bleeder resistor for Maxwell cap
  - From: Gary Lau

Prev by Date: [TCML] TC Build Guide...by Richard Hull
Next by Date: Re: [TCML] TC Build Guide...by Richard Hull
Previous by thread: Re: [TCML] TC Build Guide...by Richard Hull
Next by thread: Re: [TCML] Bleeder resistor for Maxwell cap
Index(es):
- Date
- Thread