[Home][2017 Index] Re: [TCML] VDG Collector [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] VDG Collector

Have you measured the output of your machine without the collector in place? What are the readings? 

Doug
-----Original Message----- From: ExtremeElectronics.co.uk 
Sent: Monday, February 06, 2017 5:27 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] VDG Collector

I made mine from two Ikea bowls, a sheet of aluminium and loads of filler.

http://www.extremeelectronics.co.uk/static-machines/1mv-van-de-graff-project-2/

Commercial ones like that would cost a fortune to manufacture. Your only
other option would be see if they sell spares. Or contact a friendly
metal spinning shop.

Derek


On 06-Feb-17 20:39, doug wrote:
Can anyone tell me where I might find a sausage shaped top load like the one pictured in this website? 
http://wikivisually.com/wiki/File:Van_De_Graaff_gen_03.jpg

Doug J.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla