[Home][2017 Index] Re: [TCML] Toroid height [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Toroid height



I meant 4.8 KVA.

----- Original Message -----
From: "Yurtle Turtle via Tesla" <tesla@xxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Friday, August 25, 2017 1:30:37 AM
Subject: Re: [TCML] Toroid height

4800 kVA? That's 4.8 MVA!

      From: Steve White <steve.white1@xxxxxxxxx>
 To: Tesla Coil List <tesla@xxxxxxxxxx> 
 Sent: Friday, August 25, 2017 12:11 AM
 Subject: [TCML] Toroid height
   
On my 8.6" coil I currently have the bottom of my 9" x 30" toroid mounted 2.3" above the top of the secondary winding. I seem to be getting good performance with at least 7 foot streamers from a 4800 KVA pole pig and ballast. I see no discernible corona at the top of the secondary. Would there be any advantage to mounting the toroid higher?

Steve White
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla


   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla