[Home][2016 Index] [TCML] Lower than expected performance [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Lower than expected performance



Here's what I have currently...
18 salt water caps in parallel each measuring 1.6 nF each.
3 12kV 30 mA.
85 uF input capacitor.
3" abs wrapped with 24 ga wire approx 1000 turns.
Torus is 16" x 3" with breakout.

I just can't seem to get bigger than 2 foot arcs.
I moved the secondary up/down with no marked improvement.
The secondary is about 2 inches from primary which is at a 30* with 13 available wraps but attached at 10.

Any ideas??  Or should I be happy with what I got?

Sent from my iPad
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla