Hey Dave; That was just a bunch of junk parts I cobbled together to see if
the CW would would excite it. Take a look at my other coils.
Thanks for your comment; Doug
-----Original Message-----
From: Dave Halliday
Sent: Monday, May 02, 2016 8:09 PM
To: 'Tesla Coil Mailing List'
Subject: Re: [TCML] Why does this work?
Just a very poorly designed tesla coil. Not at all efficient but enough to
light a lamp.
Here is one place to start -
http://deepfriedneon.com/tesla_frame0.html
I am sure other people can recommend other sites that are just as good
Don't worry about being inexperienced - we all have to start somewhere.
The design is very straightforward so if you start with one of the online
calculators, you will have a significantly greater chance of success on your
first coil than if you just start throwing stuff together. Be sure to plan
to use either a beer bottle/salt water capacitor or an MMC. There are some
other kinds of capacitors that absolutely will not work even though they
seem to have the correct capacitance and voltage ratings. Search the
archives for MMC
Dave
-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of doug
Sent: Monday, May 02, 2016 08:06
To: tesla@xxxxxxxxxx
Subject: [TCML] Why does this work?
I am too inexperienced to know that this would not work, so I
went ahead and tried it, and it worked!
Can someone explain it to me?
https://www.youtube.com/watch?v=yNPig4VQXPY
Doug J.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx