I'd be interested in knowing more about schematics and what the filter cost for components.
Thanks for sharing Doug and nice job on it!
--------------------------------------------
On Sat, 1/23/16, doug <doug11642@xxxxxxxxxxx> wrote:
Subject: Re: [TCML] Ignition coil HV supply
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Date: Saturday, January 23, 2016, 2:37 PM
Hi Dave; The dimmer is
set to [Just on] or minimum. some times it must be
turned up a little to start the coils but then
back to minimum to run.
So far the line
filter is working fine, I will know for sure, I guess, when
I get a -backfire- that blows the 10 amp
fuses.
Doug
-----Original Message-----
From: David Speck
Sent:
Saturday, January 23, 2016 3:20 PM
To: Tesla
Coil Mailing List
Subject: Re: [TCML]
Ignition coil HV supply
Doug,
Looks
like it runs well, and you did a robust build on your line
filter.
What percentage of
output was the light dimmer set at?
I assume you have had no feedback problems into
the house wiring?
Dave
On 1/23/2016 1:42 PM, Doug
wrote:
> I made this short video of my
ignition coil HV supply for those who are
> interested.
> https://www.youtube.com/watch?v=9NZYyX8K2qk
> Doug
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla