[Home][2015 Index] [TCML] VDGer Tesla project [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] VDGer Tesla project

To: tesla@xxxxxxxxxx
Subject: [TCML] VDGer Tesla project
From: Peter Noga <7tarotpmn@xxxxxxxxxxxxx>
Date: Sat, 5 Sep 2015 21:27:02 -0700
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=kiMzcPppqg0nUBuyauvHVgoAvAgjYy9ync44rVExSkooL+CvBHphvrr2R7/Z6yu0; h=Received:From:Content-Type:Content-Transfer-Encoding:Mime-Version:Subject:Message-Id:Date:To:X-Mailer:X-ELNK-Trace:X-Originating-IP;
List-archive: <http://www.pupman.com/pipermail/tesla/>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/options/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: "Tesla" <tesla-bounces@xxxxxxxxxx>

Hi John. 
Yeah. Using 16 Henry Weinhart long neck bottles for the caps for my Trinkhaus endeavor.  They are filled 4 3/4" with salt water and topped up with mineral oil. Some use motor oil or salad oil. 1/4" hole punched into the twist tops 6"X1/4" zinc coated carriage bolts pushed thru 1" treads up, sealed with silicone. 
Going slow, lots to do. Will keep you posted. 
Peter Noga

Sent from my iPhone
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Prev by Date: Re: [TCML] meteringRe: Power factor correction
Next by Date: Re: [TCML] Trinkhaus build/ youtube vid.
Previous by thread: Re: [TCML] VDGer Tesla project
Next by thread: [TCML] Trinkhaus build/ youtube vid.
Index(es):
- Date
- Thread