I'm at the point I need to add some motor run caps, I'm thinking the same that go on your ac units in the 40-50uf 330-440v variety unless someone has a better sugestion. Looks like I will need around 150uf per transformer I have 3 12/60 NST. Biggest question is do I run all 9 parallel or run about 3 strings of 3 to each? Would before or after the EMI filters make a difference.
Blowing 20 amp fuses on variac, don't have a clamp meter and my dmm is only good to 10 amps inline. I was going to add some and then start measuring the current?
John Cooper
Sent from my Samsung GALAXY S5™, a Cricket 4G LTE smartphone
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla