So I've been thinking a bit about this over the last couple months and
wanted to get some more discussion going.
Upon initial thought, I'm not entirely sure if I am following Matt's
thought process there on the IR front, sounds like it could have some
potential... but,
I have thought seriously about perhaps using an array of spectrometers that
have higher levels of sensitivity to spectrum areas outside of the visible
spectrum. Essentially I could take any number of input devices that
"read" or can "see" the parts of the spectrum that are not visible to
normal human vision and then multiplex those into a workstation with custom
software that would then render the much more full spectrum in unique ways
that would include both audio and visual cues, including tagging and data
overlays that will then all display in 3D space to an Oculus Rift. The
idea would then to be have sort of a "Photoshop" or immersive environment
that then can allow one to change the opacities of different layers (such
as UV or IR levels being too overwhelming when coming from the sun in
daylight, etc.).
My question here is how / where to get the appropriate sensors that would
facilitate these kinds of inputs for a multipoint array. Eg, I would set
up two identical arrays of hardware separated slightly in order to gain
depth perception. This would all then be attached to a mobile cart for
being able to use this conveniently to analyze EM fields anywhere.
Interestingly, it just came to me, this would be somewhat similar to a
non-compact version of Geordi's "visor" tech in Star Trek... :)
Any thoughts on what hardware could potentially fulfill such
extra-400-700'ish nanometer out of bound input? Of course any kind of
input mechanism could be multiplexed into the software for integration and
so I'm wide open for suggestions.
On Fri, Mar 13, 2015 at 12:03 PM, mddeming--- via Tesla <tesla@xxxxxxxxxx>
wrote:
>
> Making an image of electromagnetic radiation outside visible range sounds
> something liike the circuit of an infra-red camera but with much lower
> frequency
> response.
>
> Matt D
>
>
> -----Original Message-----
> From: illuminated <illumination00@xxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Sent: Thu, Mar 12, 2015 10:14 pm
> Subject: Re: [TCML] Capturing imagery from high energy and non-visible
> energy fields
>
>
> Gary, thanks for moving this forward. My question is regarding devices
> that I
> am building that are NOT crystal or pseudo-science related. This
> image was the
> only thing that I could find quickly to convey my attempted
> quarry. It is my
> goal to image energy fields around magnetic and
> particularly EM devices. I
> have not found any such devices (sure,
> thermographic cameras and even cameras
> that can see several hundred
> nanometers above the visual spectrum are readily
> available) although I
> have heard anecdotes of such in the past.
>
> As a
> scientist, being able to actually see things vs using mental models
> and
> assumptions is of pinnacle importance. We, as human beings, are
> visual
> creatures. We must understand things visually and ACCURATELY.
>
> I
> would very much appreciate your help in obtaining discussion on this
> topic so
> that I can advance my efforts to build Tesla-related technology.
> I will be
> happy to share some of my own research once I move over this hump
> because some
> things that I am presently observing need to be properly
> "seen" (with accuracy)
> in order to make correct assertions and productive
> assumptions.
>
>
> -G
>
>
> On
> Thu, Mar 12, 2015 at 8:20 PM, Gary Lau <glau1024@xxxxxxxxx> wrote:
>
> > Hello
> G-
> >
> > I'm one of the moderators of the TCML and I approved your post. But
> I
> > wanted to be clear that while Tesla coils used for powering Kirlian
> >
> photography is legitimate material for this forum, the typical
> > pseudo-science
> spouted on Keelynet - crystals,
> > pyramids, anti-gravity, levitation, etc -
> will not air on this forum.
> >
> > Regards, Gary Lau
> > TCML co-moderator
> >
> >
> On Thu, Mar 12, 2015 at 4:57 PM, illuminated <illumination00@xxxxxxxxx>
> >
> wrote:
> >
> > > Hello folks, I have been speaking with Kirlian photography and
> camera
> > > making experts regarding how to create imagery of high voltage
> fields at
> > a
> > > distance. I referred them to some images that claim to be
> Krilian photos
> > > of energy vortices from the tops of pyramids such as
> this:
> > > http://www.subtleenergies.com/ormus/tw/pyramids.htm
> > >
> > > They
> have repeatedly explained that I need to speak with a Tesla coil
> > > builder
> group in order to get some more information on how to accomplish
> > > such
> imagery.
> > >
> > > Would anyone know of a resource that would help me to
> understand how to
> > > capture such imagery or how to build the equipment for
> such a feat?
> > >
> > > I have been working with some high energy and non-visible
> energy
> > > experiments that remain out of the visible spectrum and am trying
> to
> > > ascertain how one can best or properly capture imagery of such
> phenomena.
> > >
> > >
> > > Appreciatively,
> > >
> > > -G
> > >
> _______________________________________________
> > > Tesla mailing list
> > >
> Tesla@xxxxxxxxxx
> > > http://www.pupman.com/mailman/listinfo/tesla
> > >
> >
> _______________________________________________
> > Tesla mailing list
> >
> Tesla@xxxxxxxxxx
> >
> http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla
> mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla