[Home][2015 Index] [TCML] Safety gap question [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Safety gap question

To: "tesla@xxxxxxxxxx" <tesla@xxxxxxxxxx>
Subject: [TCML] Safety gap question
From: Kerry Soileau <kerrys@xxxxxxxxxxxxxx>
Date: Fri, 8 May 2015 13:16:37 +0000
Accept-language: en-US
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla/>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/options/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: "Tesla" <tesla-bounces@xxxxxxxxxx>
Thread-index: AdCJkTaa5rGgokaoTi+XB9evY268nw==
Thread-topic: Safety gap question

Hey guys. I got my parts in yesterday. 5 days early! Spent 6 hours winding a 3"x 22" coil on a microwave turn table motor.....never again lol. Anyway my question is, how far should my safety gap be for my MMC bank. Thanks in advance. 


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Safety gap question
  - From: Jim Lux
- Re: [TCML] Safety gap question
  - From: krux

Prev by Date: Re: [TCML] I need info's about a cap
Next by Date: Re: [TCML] I need info's about a cap
Previous by thread: [TCML] electronic ignitor
Next by thread: Re: [TCML] Safety gap question
Index(es):
- Date
- Thread