Thanks for sending those. You have given me some ideas that I can work
on. Instead of bowls for the sphere I use garden gazing balls.
They come
in many sizes and look great, but the same old problem of the
opening is
there. I can see that you have tried to cut down on the corona like
I have
using rings. I tried rings made out of copper tubing and plate
aluminum
and still get corona discharge. I have tried to turn the opening
upward
like the ones you can buy, but have not been successful. The main
problem
is that the gazing balls are made out of stainless and the professional
ones are aluminum. Aluminum is much more malleable and is easy to
shape.
There is a company that will form any size ball up to 36 inches and
will
also form the opening that is turned upward. I contacted them and they
only want $4000 to make one. Might as well be 4 million to me. I
would
make a nice display though. I keep on entering the lottery, but so
far I
have only won one dollar. 3999 to go. As far as the belts, I have
been
using vinyl strips that is used in upholstery. Vinyl does not work on
rounded rollers as I will not conform to the round shape. It is too
stiff. I got some exercise latex straps, cut them to length,
fastened the
ends together and tried to run them, but I think the material is too
thin
as it did not work. I could use some heavier latex, but I don't
know where
to get it.
As far as Tesla coils are concerned, I have made several, the first
one in
high school back in the 50's. I got a kit from Tesla works, (Alan)
and it
works OK, but I wanted bigger. I then got a solid state one from Dan
McCauley (Eastern Voltage Research), but it does not work and they
can't
fix it. $2100.00 down the tubes. It now just collects dust in my
garage.
I contacted the man in Oklahoma that built the very large one he runs
outdoors, but he won't release any information on how it is built.
You can
see it run if you search "very large Tesla coil".
I have a larger VDG in partial assembly, but am waiting on how to solve
the belt walk issue and the corona issue as well. A search for thicker
latex is next, I guess. I can machine any parts I need as I have a
machine
shop.
Thanks
John
-----Original Message-----
From: msweeney23@xxxxxxxxx
Sent: Mon, 24 Aug 2015 20:54:02 -0500
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] Seaching for Mike Delosier
Here are some videos from my older models. I did build a six foot
model
with a 14inch sphere running at 10x power delivery. It was a beast but
caused me much trouble due to extremely high electrical field
potentials
around the sphere opening. I used steel Ikea bowls and they just
wanted
to
buckle when I radius them. I have made a few corona rings that
help, but
I'm not so good at joining the two ends and soldering a nice smooth
joint
=(
All my devices are completely home built including PVC form (well I
purchased the PVC), belts, rollers, corona tubes, comb assemblies and
various discharge rods. Of course the motor and hemispherical bowls
were
items I could not make myself. Note all devices are extremely quiet- I
used
high quality bearings everywhere and drill press for accuracy.
My 6 foot high-power version was insane throwing off continuous
charges
up
to 40 inches in length which seems way more than possible using a
14inch
sphere.
I have cannibalized my large generator and am building two 3 foot
dual-pole
positive/negative generators in an attempt to 'double' the voltage
gradient. We shall see!
Next project is a new Thunderstorm built very high quality and full
self-contained re-pumping. After that it's either a giant Van De
Graaff
or
a tesla coil. I can build belts up to 6inches wide and many 10's of
feet
long, but I cant yet built large spheres over 14inches =(
https://www.youtube.com/watch?v=Fb-tWeJ3Z0U
https://www.youtube.com/watch?v=ABKCGXuJDlw
https://www.youtube.com/watch?v=eRsl6rs2cEo
https://www.youtube.com/watch?v=Hs3K0C1CeVk
https://www.youtube.com/watch?v=O3CSO9fIQu0
https://www.youtube.com/watch?v=o8ZHrSiVEXs
https://www.youtube.com/watch?v=v6KdIKDr4Tc
https://www.youtube.com/watch?v=em67iXD5-ms (voltage specified is
likely
incorrect)
https://www.youtube.com/watch?v=I37C5qWRi3A (voltage specified is
likely
incorrect)
https://www.youtube.com/watch?v=cQTRKiYsCEc (just for fun).
Any questions please let me know, I'm certainly no expert but have
learned
a few tricks to provide excellent charge rates, smooth operation, and
huge
reduction in expensive (my 6ft long 2ft wide belts are only $3 each
and
work better than any other I have tried).
Thanks!
Matt Sweeney
On Sat, Aug 22, 2015 at 9:54 PM, wt5y <wt5y@xxxxxxxxx> wrote:
Cornel dubilier 942c20p15k-f .15uf 2000v caps can be had $4.99 ea
from
easternvoltageresearch.com
Sorry don't know mike. Someone else may.
If you don't mind can I see some of the van DE Graaf you've made ie
website,youtube? And what are Kelvin thunderstorm project, will
Google
it
but never heard of it.
John cooper WT5YWt5y@xxxxxxxxx
Sent from my Samsung GALAXY S5™, a Cricket 4G LTE smartpho
-------- Original message --------
From: Matthew Sweeney <msweeney23@xxxxxxxxx>
Date: 08/22/2015 16:10 (GMT-06:00)
To: tesla@xxxxxxxxxx
Subject: [TCML] Seaching for Mike Delosier
Hello, I recently joined this mailing because I didn't know it
existed.
I
don't make tesla coils any more but I produce large Van De Graff
generators
and simple kelvin thunderstorm projects to amuse myself and keep my
nephews
amazed.
Anyway I visited my local Axe-MAn today and learned that they have a
customer named Mike Delosier who lives in minnesota and has some
impressive coils.
I am hoping very much to contact Mike but I have not been able to
find
his
e-mail address. I don't see any recent posts with his name so
maybe he
is
not a member anymore?
So, if anyone knows him, I would be delighted to send him an email.
Alternatively he can send ME an e-mail as to be less intrusive:
msweeney23@xxxxxxxxx
I did build several decent coils over 20 years ago with home made
plate
class capacitors and a horribly inefficient stationary spark gap. I
didn't
have any protection circuitry in place but somehow my HV transformers
survived, however my capacitor eventually exploded.
Now I have three perfect 15,000v 250ma NST's just sitting waiting
for a
purpose - so I think it's time to start planning a new build. I have
never
built a proper solid state coil and am considering this option. But a
traditional rotary spark-cap coil with high-voltage capacitors
would be
much less effort. The secondary will be 5 Feet and using enameled
magnet
wire.
I'm looking for good sources of (cheap) high voltage capacitors
and much
info on recent developments in the field. I especially am
interested in
inductor usage to prevent spikes back to the NST. Also I need some
advice
on secondary wiring cable is there a preferred variety for recent
coils?
Ill use copper tubing for primary. I may also build my own rolled
capacitors but I'm thinking obtaining newer HV caps in a bank may
actually
be cheaper.
If there other members in the Minnesota/Wisconsin I would also
like to
connect. I'm desperate to find a powerful coil to blow my nephews
minds
=)
Thank you for any help you can provide. I'll be reviewing the lists
looking
for new info also but direct contact for any suggestions would be
welcomed.
Regards,
Matt Sweeney
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
____________________________________________________________
FREE ONLINE PHOTOSHARING - Share your photos online with your
friends and
family!
Visit http://www.inbox.com/photosharing to find out more!
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla