[Home][2014 Index] Re: [TCML] Wraping gto wire [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Wraping gto wire



Yeah I have to cut my copper tubing and just bring the gto wire up to it instead.  Easier than redrilling and inserting bushing of some sort.  The grounding wires ( bottom secondary, nst ground, strike rail) that goto the ground rod I'm planning on using #8 thhn I had or does that have to be gto wire too?


Sent from my Cricket smartphone

-------- Original message --------
From: mddeming--- via Tesla <tesla@xxxxxxxxxx> 
Date: 11/04/2014  18:36  (GMT-06:00) 
To: tesla@xxxxxxxxxx 
Subject: Re: [TCML] Wraping gto wire 
 
Hi John,


While not forbidden, extra turns are strongly discouraged for the following reasons:.
Every loop adds some inductance to the circuit and when you are doing short, 
"spectrally dirty" bursts of hundreds of amps, you can get some pretty strange 
parasitic oscillations that suck energy from going to the secondary.
Small radius right-angle turns encourage corona formation. 
Any feed-thrus in wood should be ceramic, plastic,or rubber. Remember, above ~12KV 
wood starts to become unpleasantly conductive.


Matt D.
an ancient ghost of W2CLE


-----Original Message-----
From: John Cooper <wt5y@xxxxxxxxx>
To: alan <alan@xxxxxxxxxxxxxx>; tesla <tesla@xxxxxxxxxx>
Sent: Tue, Nov 4, 2014 7:07 pm
Subject: [TCML] Wraping gto wire


Coiling the wire around the pvc posts a turn or two to help keep it supported is 
a nono?  Going from one level to another ie filter up to spark gap two turns 
around the pipe to keep nice and neat will affect performance?  

If so how bout drilling a hole in wood and passing the  gto wire through the 
wood from one level to the next?  Any problrms with that? 

Trying for as neat as can make it without messing up performance.


I've already found out the hard way I need a table saw some of my circular saw 
cuts leave a lot to be desired lol.

John cooper WT5Y 




Sent from my Cricket smartphone
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla