Okay so I'm preparing to buy capacitors. I need to know if what I have here is good. The file titled "Tibs" has my idea for the capacitance and other options that I don't actually know for sure yet. "Tibs Basic" has only the information I know for sure filled in. If there is someone who is willing to take some time with me on this, since it's my first coil, I'd very much appreciate it. Just email me outside the Digest.
Thank you guys,Tyler
TIbs
Generated by TeslaMap
www.teslamap.com
----- NST Parameters -----
NST Input Voltage: 120 V
NST Input Frequency: 60 Hz
NST Output Voltage: 7.5 kV
NST Output Current: 30 mA
NST Watts: 234 W
NST VA: 225
NST Impedance: 250 ohm
NST PFC Capacitance: 41.4 uF
----- Primary Capacitor / MMC Parameters -----
Optimum Resonate Sized Cap (with static spark gap): 10.6 nF
Optimum LTR Sized Cap (with static spark gap): 17.2 nF
Optimum LTR Sized Cap (with sync rotary spark gap): 27.7 nF
Optimum Resonate Size Cap Joules: 0.6
Optimum LTR Cap Joules (with static gap): 1
Optimum LTR Cap Joules (with sync rotary gap): 1.6
Primary Capacitance: 11.11 nF
MMC Capacitor Value (individual cap): 0.1 uF
MMC Capacitor Voltage (individual cap): 1 kV
----- Primary Coil Parameters -----
Primary Coil Wire Diameter: 0.125 in
Primary Coil Wire Spacing: 0.25 in
Primary Coil Center Hole Diameter: 6 in
Primary Coil Incline Angle: 0 degrees
Required Primary Inductance:
Primary Coil Tap Turn:
Primary Coil Diameter At Tap Turn:
Primary Coil Height At Tap Turn:
Primary Coil Wire Length At Tap Turn:
----- Secondary Coil Parameters -----
Secondary Coil Magnet Wire AWG: 22
Secondary Coil Magnet Wire Diameter: 0.027 in
Secondary Coil Winding Height: 27 in
Secondary Coil Form Diameter: 4.4 in
Secondary Coil Turns: 959
Secondary Wire Length: 1,105 ft
Secondary Wire Weight: 2.15 lbs
Secondary Coil Height To Width Ratio: 6.1:1
Secondary Coil Inductance: 15.4 mH
Secondary Coil Capacitance: 10 pF
----- Top Load Parameters -----
Toroid Ring Diameter 1:
Toroid Total Diameter 1:
Toroid Ring Diameter 2:
Toroid Total Diameter 2:
Top Load Sphere Diameter:
Toroid 1 Capacitance:
Toroid 2 Capacitance:
Top Load Sphere Capacitance:
Total Top Load Capacitance:
----- Tesla Coil Parameters -----
Resonate Frequency:
End of report
Tibs Basic
Generated by TeslaMap
www.teslamap.com
----- NST Parameters -----
NST Input Voltage: 120 V
NST Input Frequency: 60 Hz
NST Output Voltage: 7.5 kV
NST Output Current: 30 mA
NST Watts: 234 W
NST VA: 225
NST Impedance: 250 ohm
NST PFC Capacitance: 41.4 uF
----- Primary Capacitor / MMC Parameters -----
Optimum Resonate Sized Cap (with static spark gap): 10.6 nF
Optimum LTR Sized Cap (with static spark gap): 17.2 nF
Optimum LTR Sized Cap (with sync rotary spark gap): 27.7 nF
Optimum Resonate Size Cap Joules: 0.6
Optimum LTR Cap Joules (with static gap): 1
Optimum LTR Cap Joules (with sync rotary gap): 1.6
Primary Capacitance:
MMC Capacitor Value (individual cap): 0.1 uF
MMC Capacitor Voltage (individual cap): 1 kV
----- Primary Coil Parameters -----
Primary Coil Wire Diameter: 0.125 in
Primary Coil Wire Spacing: 0.25 in
Primary Coil Center Hole Diameter: 6.4 in
Primary Coil Incline Angle: 0 degrees
Required Primary Inductance:
Primary Coil Tap Turn:
Primary Coil Diameter At Tap Turn:
Primary Coil Height At Tap Turn:
Primary Coil Wire Length At Tap Turn:
----- Secondary Coil Parameters -----
Secondary Coil Magnet Wire AWG:
Secondary Coil Magnet Wire Diameter:
Secondary Coil Winding Height:
Secondary Coil Form Diameter: 4.4 in
Secondary Coil Turns:
Secondary Wire Length:
Secondary Wire Weight:
Secondary Coil Height To Width Ratio:
Secondary Coil Inductance:
Secondary Coil Capacitance:
----- Top Load Parameters -----
Toroid Ring Diameter 1:
Toroid Total Diameter 1:
Toroid Ring Diameter 2:
Toroid Total Diameter 2:
Top Load Sphere Diameter:
Toroid 1 Capacitance:
Toroid 2 Capacitance:
Top Load Sphere Capacitance:
Total Top Load Capacitance:
----- Tesla Coil Parameters -----
Resonate Frequency:
End of report