[Home][2014 Index] [TCML] Base and Primary [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Base and Primary



Okay so I'm going ahead with the spoke idea. Here's the plan:
Get an 18" x 6" x 0.75" piece of HDPE.
Using a tablesaw, cut strips along the 18" side, about 0.25" thick.
Drill evenly spaced holes out using some kind jig.
Thread my tubing through and mount the spokes to... something.
What should I mount to and are there any flaws with what I outlined?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla