Re: [TCML] DIY dent-proof Toroids

[jhowson4@xxxxxxxxxxx]

Indeed brian, something like that, except with out the bottom toroid and a more contoured section rather than straight. 
but that's pretty close. 
I'll just have to make one and see what happens. =) 



Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

----- Original Message -----
From: "BrianB" <brianb@xxxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Sunday, May 26, 2013 10:03:59 AM 
Subject: Re: [TCML] DIY dent-proof Toroids 

Something like Bill Wysock used on his Model 12? 
http://www.teslatechnologyresearch.com/model12.html 


On May 25, 2013, at 4:59 PM, jhowson4@xxxxxxxxxxx wrote: 

> Brilliant, With this method it would be really easy to experiment with different shapes. 
> I have always wanted to make a toroid that the bottom surface contoured down and became the same diameter as the secondary. (think like one of those mostly spherical water towers) 
> Because the top of the secondary is the same potential as the toroid, it would become like one continuous surface. 
> Might be cool to try. =) 
> 
> 
> 
> Thanks, 
> John "Jay" Howson IV 
> 
> 
> "Why thank you, I will be happy to take those electrons off your hands." 
_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla