Re: [TCML] Table Top Tesla Coil

[mddeming@xxxxxxx]

Hi Amir,


something isn't adding up here. If your start with a diameter of 4 in. and increase by 1 in on each turn, then 6 turns only yields 10 in diameter, not 11 in. It looks like your coil will tune at about 3.5 turns.

Matt D


-----Original Message-----
From: Amir Mojarradi <ln2guy42@xxxxxxx>
To: tesla <tesla@xxxxxxxxxx>
Sent: Mon, Jul 15, 2013 4:37 pm
Subject: Re: [TCML] Table Top Tesla Coil


Hi Matt, 


Thank you for checking over my numbers. 


For the Primary Coil for the 2.5 inch x 11 inch secondary Tesla coil, here is 
what I have planned:


Inner Diameter: 4 inches
Number of Turns: 6 inches
Wire Diameter: 0.25 inches
Turn  Spacing: 0.25 inches
Outer Diameter: 11 inches
Length of Wire: 201.061 inches
Inductance: 13.473 uH


I calculated the resonant frequency for the secondary circuit to be 393.485 kHz. 
Please let me know your thoughts on these primary coil dimensions. Would you 
suggest any changes?


Thank you, 


Amir Mojarradi
Los Angeles, CA



-----Original Message-----
From: mddeming <mddeming@xxxxxxx>
To: tesla <tesla@xxxxxxxxxx>
Sent: Mon, Jul 15, 2013 7:26 am
Subject: Re: [TCML] Table Top Tesla Coil


Hi Amir,


So far, your numbers look good. However, you have said nothing about the 
dimensions of your primary coil. Since from the information you've given, your 
secondary resonant frequency will be near 390 KHz, to balance the primary will 
need to be about 3.33 uHy giving you the resonant frequency near 390 kHz


Matt D



-----Original Message-----
From: Amir Mojarradi <ln2guy42@xxxxxxx>
To: tesla <tesla@xxxxxxxxxx>
Sent: Sun, Jul 14, 2013 7:19 pm
Subject: [TCML] Table Top Tesla Coil


Hi everyone! 


I would love to hear your thoughts on the table top sized Tesla coil I am in the 


process of building. Specifically, I was wondering if I have chosen optimal 
values for the primary capacitance and dimensions for the top load. 


Any other comments on improving the design would be incredibly appreciated.


Here are the specifications:




Power Supply: 5,000 Volt, 60ma Neon Sign Transformer (with safety gap and Terry 
Filter)


Secondary Diameter: 2.5 inches (acrylic tubing)
Secondary Wire Gauge: 29
Secondary Winding Length: 11 inches
Secondary # of Turns: 900
Secondary Self Capacitance: 4.5 pF


Primary Capacitance: 0.0499 uF @ 12,000 volts (MMC of (12) Cornell-Dubillier 
942C20P15K-F 0.01 uF 2,000 volt capacitors; 2 parallel strings of 6 in series) 


Top Load: 8 inch diameter stainless steel sphere (11.4 pF) 


Spark Gap: (2) 1/8 inch diameter Tungsten Electrodes




Thank you so much for your help!


Amir Mojarradi
Los Angeles, California








_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla