[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Induction demonstration
It just pisses me off. Lol
My friend will not sit down and do the math. His coils are amazing. It's trial and error. He has a glass tube for the secondary spark gap. It is amazing what he is doing. He has no money so he pulls wire out of old motors to wind the secondary.
Michael Cronin
Sent via iPhone
Practical FX Reel
http://youtu.be/e1fIFlTgHMQ
IMDB http://m.imdb.com/name/nm3179238/
Acting reel
http://youtu.be/oq6n-wP5ifM
On Aug 8, 2013, at 5:24 AM, "Richard Schmuke" <rdj@xxxxxxxxxxxx> wrote:
> Thinking along those lines, would a fist size roll of 22ga hookup wire be
> easier to unroll than 12ga?
>
> Rich , Kd0zz
>
> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
> Of Jim
> Sent: Thursday, August 08, 2013 5:17 AM
> To: Tesla Coil Mailing List
> Subject: Re: [TCML] Induction demonstration
>
> I was thinking about actually showing people right before their very eyes
> how just rolling up an energized ball of wire would have an affect on an
> electrical circuit.
>
> On 8/7/2013 10:03 AM, Richard Schmuke wrote:
>> I run my TC transformer thru a 500ft coil of #12 so I understand what
>> you want. Do you have any smaller gage wire? You could make a small
>> coil around a bolt and move the bolt in and out. My inductor is
>> controlled by a handful of steel wire (elec fence wire) that is
>> wrapped and moveable thru the roll of 12ga.
>>
>> Rich, Kd0zz
>>
>> -----Original Message-----
>> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
>> Behalf Of Jim
>> Sent: Wednesday, August 07, 2013 5:45 AM
>> To: Tesla Coil Mailing List
>> Subject: [TCML] Induction demonstration
>>
>> Hello,
>>
>> I am putting my Tesla Coil in a makers fair next weekend. I would like
>> to make some simple demonstrations of induction and capacitance using
>> 60hz AC power. For example taking a 100' ball of #12 THHN and powering
>> a light bulb and while bulb is still energized unroll the ball of wire
>> and show how the light bulb becomes brighter. I don't think it will
>> become brighter because I believe the ball of wire will only delay the
>> time it takes to light the bulb. It will not prevent the bulb from
>> burning at full capacity. However this is along the lines of what I am
>> thinking about. Does anyone have any suggestions that they would not mind
> sharing?
>>
>> Thanks,
>>
>> Jim
>>
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>
>
> --
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla