RE: [TCML] Isolating Transformer

["Reverend Fuzzy" <pastor@xxxxxxxxxxxxxxxxx>]

Didn't seem to have any effect on performance.
Perhaps someone with access to the right equipment
could try different configurations (before/after/both)
to see if maybe there's a difference in # of transients
trying to make an exit into the power line.

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Michael Gray
> Sent: April 26, 2013 8:33 AM
> To: Tesla Coil Mailing List
> Subject: Re: [TCML] Isolating Transformer
> 
> So it doesn't make any functional difference?
> 
> 
> On 26 April 2013 14:11, Reverend Fuzzy <pastor@xxxxxxxxxxxxxxxxx> wrote:
> 
> > I had a filter on each side of the transformer...probably
> > a little overkill, but better to err on the side of safe.
> >
> >
> > > -----Original Message-----
> > > From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> > Behalf Of Michael Gray
> > > Sent: April 26, 2013 2:13 AM
> > > To: Tesla Coil Mailing List
> > > Subject: Re: [TCML] Isolating Transformer
> > >
> > > Does it matter if I put my line filter in before or after the isolation
> > > transformer?
> > >
> > >
> > > On 13 April 2013 14:21, Michael Gray <graymp89@xxxxxxxxx> wrote:
> > >
> > > > Excellent. Nice to have found a use for it finally, assuming it
> > works...
> > > > haven't tried it yet!
> > > >
> > > > What's the primary reason for using them, generally? Safety? Or
> > > > RFI/surge suppression? Or both...
> > > >
> > > > On that note, how effective are they at suppressing surges, transients
> > > > etc.? I don't quite understand how voltage surges would be dampened
> > inside
> > > > the isolation transformer. What's actually limiting the output voltage?
> > > >
> > > >
> > > >
> > > >
> > > > On 12 April 2013 17:50, dave pierson <dave_p@xxxxxxxxxxx> wrote:
> > > >
> > > >>
> > > >>
> > > >> > Brian, what do you do with the output earthing? Do you use MOV's or
> > > >> > other filters?
> > > >> > I have a 1kW isolating transformer. The only time I have used it
> > live
> > > >> > was for a briefcase coil (1/2 low power NST for 3 inch sparks).
> > > >> > Interfered with the PA some distance away big time. I used a
> > > >> > counterpoise plus mains earth.
> > > >>
> > > >>     Was the interference present with the isolation transformer?
> > > >>
> > > >>     Isolation transformers come in (at least) two types.
> > > >>     The usual/simple type is just a one/one transformer,
> > > >>     two coils and core.  This provides isolation for DC
> > > >>     and LF AC, however stray capacity between windings/core
> > > >>     can couple RF.
> > > >>
> > > >>     A more elaborate type includes a 'screen' (internal
> > > >>     Faraday Cage), which reduces the RF coupling.  Sometimes,
> > > >>     if i recall, referred to as an 'instrumentation
> > > >>     transformer'?
> > > >>
> > > >>      best
> > > >>       dwp
> > > >> _______________________________________________
> > > >> Tesla mailing list
> > > >> Tesla@xxxxxxxxxx
> > > >> http://www.pupman.com/mailman/listinfo/tesla
> > > >>
> > > >
> > > >
> > > _______________________________________________
> > > Tesla mailing list
> > > Tesla@xxxxxxxxxx
> > > http://www.pupman.com/mailman/listinfo/tesla
> > >
> > >
> > > -----
> > > No virus found in this message.
> > > Checked by AVG - www.avg.com
> > > Version: 2013.0.3272 / Virus Database: 3162/6273 - Release Date: 04/25/13
> >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3272 / Virus Database: 3162/6274 - Release Date: 04/26/13

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla