Re: [TCML] Rewiring with Copper Strap - What All Needs It?

[Neon Tesla <neontesla@xxxxxxxxx>]

A bit off topic but how did you get your propeller gap to not self
destruct, my asynchronous gap exploded...

Thanks,
          -Noah H                              *
                             *
*
*


On Wed, Apr 10, 2013 at 3:10 PM, Brandon Hendershot <
brandonhendershot@xxxxxxxxx> wrote:

> Hi All,
>
> I've just begun replacing some of my flimsy 10 AWG wire with 5/8" copper
> strips/strap. I know that surface area is the most important thing in RF
> wiring, but I'm not sure where all in the primary circuit it's needed. I'm
> positive it's needed between the spark gap, caps, and primary, but what
> about from the nst (/terry filter) to the spark gap? I'd like to think the
> connections between the nst and terry filter can remain 10 AWG.
>
> Here are a couple pictures of my rig if it helps any:
> goo.gl/rFV37
> goo.gl/kMsBs
>
> Thanks,
> Brandon H.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla