[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [TCML] Measuring secondary current



On 1/9/2012 12:14, Andreas Hahn wrote:
Thanks. I was actually going off a post to TCML ages ago which recommended 300 turns on the toroid, evidently for a different purpose!

Is there a reference for CT construction you can point me to? Certainly I can follow your directions approximately (say, 25 turns on the toroid, a 100nF capacitor, 470 ohm resistor), but I would be doing so without knowing how any of those values interact or affect the final measurement.
I wrote this:
http://www.coe.ufrj.br/~acmq/tesla/current.pdf

Antonio Carlos M. de Queiroz
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla