[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] PCB Boards



On 1/23/12 1:12 PM, Cole Awesome-Jordan wrote:
I haven't start boards and I don't any plans set yet. I'm scouting out
info, in about half a year or a year i hope to build a DRSSTC something
like this one http://www.goodchildengineering.net/tesla-coils/drsstc-1
And I'm just trying to figure all the parts sourcing now.

Anybody know a general idea of how much this will cost?


About $50 for 3copies of a 2.5x3.8" boards, or something like that.

If you go to real boards.. 2 layers+soldermask+silk screen runs about $100-150 for qty 2 up to about 20 square inches from a fast turn proto house, .. added boards run about $0.50-$1/square inch.


4 layer boards cost more

More holes costs more
more kinds of holes costs more

each board house has a certain "panel size" that is cheapest to run, especially with multiple copies of the same board on it.

Get over 8 layers and the price starts to go up pretty quick, because of registration issues.

Other things you need to check into: what's the finest pitch/narrowest trace/narrowest spacing that they can do. If you don't need fine pitch, then you can go to a house that has less precision and will be cheaper.


it *is* a commodity and very competitive.


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla