[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Short Circuit.
It would need to be hollow
Chip.
Carl Noggle <cn@xxxxx> wrote:
>For an inductor core, you will need to make it from thin laminations or
>bundles wires so that the core doesn't act as a secondary coil with a
>huge current step-up, which will eat power and cause your core to
>overheat. It's probably best to get a core from an old transformer and
>use that. If you take apart a burned-out NST the coils will be wound on
>a straight bar that can be separated from the rest of the core, and you
>could use that. At least that was the way they were made when I was a
>pup, which is ancient history.
>
>
>
>
>> Inductors don't burn off power as resistors do, so cooling won't be an
>> issue unless you have highly resistive wire...
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>
>_______________________________________________
>Tesla mailing list
>Tesla@xxxxxxxxxx
>http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla