Re: [TCML] Bearings

["jeff mill" <jeffmill2@xxxxxxxxxxx>]

John
I have some pillow block bearings of good quality. They are fairly compact 
and mount by way of two threaded holes from underneath and not from flanges 
or "ears" . They were removed from scrapped medical eq. The ideal way to use 
them would be in the pillow block but I could press them out. They are 
sealed. You would be more than welcome to a set of them if you would be 
willing to pay shipping. I need to double check to make sure they are .75 
and not an off size metric.

-----Original Message----- 
From: jhowson4@xxxxxxxxxxx
Sent: Wednesday, February 29, 2012 1:16 AM
To: Tesla Coil Mailing List
Subject: [TCML] Bearings

Hello all,

I bought some bearings on eBay for my rotary gap, and I am displeased with 
the quality I received, they are very loose. Made by VXB if you are 
wondering.
Its most certainly an I got what I paid for situation.

Does anyone have a preferred place to get quality bearings, I don't need 
super high quality, but quality within a reasonable price range.
I am looking for 1.75" OD .75" ID with a flanged rim designed for a press 
fit.




Thanks for any advice,
John "Jay" Howson IV


"Why thank you, I will be happy to take those electrons off your hands."

----- Original Message -----

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla