Re: [TCML] Hoyt Axton Tesla Coil

[otmaskin5@xxxxxxx]

Hi Frank, I would love to see them too.  If it wouldn't be too much trouble, here's my email address:  otmaskin5@xxxxxxx


Thanks!


-----Original Message-----
From: Bart B. Anderson <bartb@xxxxxxxxxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Sun, Feb 26, 2012 10:37 am
Subject: Re: [TCML] Hoyt Axton Tesla Coil


Actually Frank, I would love to see any pics you have of this coil.
Please send to: bartb@xxxxxxxxxxxxxxxx

Thanks for sharing.
Bart


On 2/25/2012 12:07 AM, Frank wrote:
> Hi all,
> I won a nice Tesla coil off Ebay. It was custom built for Hoyt Axton 
> by Bill Wysock.
> It ended up in Montana where Hoyt spent his final years.
> You can Goggle Hoyt for his bio.
> I have it home and cleaned up and working.
> I had to replace the power cord and cap and get a new key made for the 
> key switch and tighten all connections.
> The original cap was a glass oil filled one and it had gotten cracked 
> and all the oil leaked out at some point.
> If anyone would like pix of it and I would be happy to send about a 
> 3mb file of pictures and info.
> Appears to have a 9kv NST (no data plate on the xfmr)  and a 0.01 mfd 
> cap with a 5" dia secondary and about 15 1/2" of windings on clear 
> Lucite tubing.
> Has a single 1/2" dia tungsten spark gap and a 5" copper sphere top load.
> Will throw about an 8" spark.
> Frank _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla