RE: [TCML] Auto Ignition Cable?

["Richard Schmuke" <rdj@xxxxxxxxxxxx>]

I would check them with a ohm meter or look at the conductor, if it appears to be a solid wire you should be OK, if it appears to be a fiber then it is a resistor cable.
Rich , kd0zz

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of jhowson4@xxxxxxxxxxx
Sent: Tuesday, August 21, 2012 12:23 PM
To: tesla list
Subject: [TCML] Auto Ignition Cable?

Hello All, 

I just stumbled across a bunch of auto ignition cables, I was wondering if they have any use to us for HV related things. 

A quick internet search says that the cables may have a carbon core or something like that, I dont know much about cars but i assume this is something that makes these not all that useful for general experimenting. 

Other wise, I would imagine their short lengths to be perfect for connecting the non-tank portions of my tesla coil. 

Thoughts? 



Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla