[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] franklins bells?

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] franklins bells?
From: Tesla <tesla@xxxxxxxxxxxxxxx>
Date: Thu, 12 Apr 2012 07:19:11 +1200
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
In-reply-to: <bay0-p5-eas1268CF33CFB0C7F85CEC145AB350@xxxxxxx>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
References: <SNT143-W503EF66DB3FC6565C0C6EAB340@xxxxxxx> <4F858E60.10904@xxxxxxxxxxxxxx> <bay0-p5-eas1268CF33CFB0C7F85CEC145AB350@xxxxxxx>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hi

I use 1/2 wave rectification from an series set of MWO diodes. Depending onDC voltage required (variac settings ) and filter configuration 3 or morein series, They run about 9kV PIV I think, I've got dozens of these fromwrecked MWO's used as a source of MWO xfrmrs.


Ted in NZ

Does anyone know of a good guide/ instructions on how to rectify an nst?Thanks



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

References:
- [TCML] franklins bells?
  - From: James Hutton
- Re: [TCML] franklins bells?
  - From: Roger Smith
- Re: [TCML] franklins bells?
  - From: James Hutton

Prev by Date: RE: [TCML] franklins bells?
Next by Date: [TCML] Re: Franklins bells
Previous by thread: RE: [TCML] franklins bells?
Next by thread: Re: [TCML] franklins bells?
Index(es):
- Date
- Thread