[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] MMC Capacitor Spacing



The only poly type material i have is polystyrene, would that type of poly work? If not ill just space them about .25" of an inch.

Quoting Gary Lau <glau1024@xxxxxxxxx>:

I think that would be asking for trouble.  I don't know that the
outermost film layer is rated to any particular standoff voltage (I
saw nothing about that on the spec sheet), but in a high voltage
design, it would just be foolish to assume anything.

Can't you just put a (pulling a number out of the air...)  40 mil
thick piece of poly between each pair of caps?

Regards, Gary Lau
MA,  USA

On Fri, Sep 2, 2011 at 1:36 PM, Cole Awesome-Jordan
<jordancole@xxxxxxxxxxxxxxxxxxx> wrote:
Hello all, I'm working on a tesla coil that is space restricted (platform
9.75"x15 yes there is a reason it's rectangular) and to save space i was
wondering if i could put 8 942C capacitors side by side (no space between)
and not have any problems.

Any help is appreciated.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla




_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla