Re: [TCML] RE: 942C current?

[jeremyee@xxxxxxxx]

Kind of not directly related to the specific topic, but I am also in need of the 942 caps. Anyone interested in a group buy? Dr. R, do you have a large quantity that you would be willing to sell us? If not, where is the best place to buy these at the lowest price. Thanks in advance!

Jeremy
Cincinnati, OH
Sent from my BlackBerry device from Cincinnati Bell Wireless

-----Original Message-----
From: jimlux <jimlux@xxxxxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx
Date: Tue, 01 Mar 2011 05:04:02 
To: Tesla Coil Mailing List<tesla@xxxxxxxxxx>
Reply-To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] RE: 942C current?

On 2/28/11 10:10 PM, Etienne Dreyer wrote:
>
> Hi everyone,
> I was going to order the 942C series cornell dubilier caps (2kV, 0.15uF http://www.cde.com/catalogs/942C.pdf ), but am now worried that their current (amps) ratings are too low for my MOT driven coil. Should I order the more expensive 941C caps (1.2kV, 0.22uF http://www.cde.com/catalogs/941C.pdf) although their dV/dT ratings aren't as good? Does someone know which are better for the high current output of MOTs?
> Many thanks,
> Etienne 		 	   		  _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


942 are better than 941 for TC applications.

Check back in the archives for the test data and analysis by Terry Fritz.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla