[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Tungsten electrode thickness

To: tesla list <tesla@xxxxxxxxxx>
Subject: [TCML] Tungsten electrode thickness
From: jhowson4@xxxxxxxxxxx
Date: Fri, 10 Jun 2011 03:06:21 +0000 (UTC)
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hello everyone, 
I was curious to know if anyone has produced a table relating tungsten electrode diameter to Power supply KVA ratings. 

A list member generously hooked me up with some 1/8" rods and I am wondering if they will be fine working with my 3Kva potential transformer for extended run durations. 

Thanks, 
John "Jay" Howson IV 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Tungsten electrode thickness
  - From: David%20Rieben
- RE: [TCML] Tungsten electrode thickness
  - From: Phil Tuck

Prev by Date: Re: [TCML] RSG Upgrade Performance Video
Next by Date: RE: [TCML] RSG Upgrade Performance Video
Previous by thread: Re: [TCML] RSG Upgrade Performance Video
Next by thread: Re: [TCML] Tungsten electrode thickness
Index(es):
- Date
- Thread