Re: [TCML] DRSSTC weird waveform behavior

[Michael Twieg <mdt24@xxxxxxxx>]

Could you post the actual circuit of the CT burden network, with component
values?

-Mike

On Sat, Jul 2, 2011 at 4:49 PM, Justin B <boshjack@xxxxxxxxxxx> wrote:

>
> Just giving an update to progress.
>
> currently, I have an inductor and resistor (1ohm - 100K) in parallel with
> my CT.  Turning the potentiometer, does nothing at all.  However, the
> inductor has helped.  If any one can give feedback as to what im doing wrong
> with this POT, please let me know. because it does NOTHING.  The pot is in
> working condition.
>
> Here's what my waveform use to be like.  As many of you told me, It's
> delaying.
> http://i.imgur.com/F8NVk.jpg
>
> Heres what it looks like with the inductor in parallel, and the worthless
> pot.
> http://i.imgur.com/1EKVL.jpg
> http://i.imgur.com/tuJRM.jpg
>
> Still experiencing Down-slopes in the voltage, likely due to a crappy
> isolation transformer for testing.  Still working on the squiggles for the
> DC voltage, and I still need to get rid of the spikes.  But hey, I'm happy
> that I FINALLY moved the phase.  It obviously isn't dead centered, but its a
> lot closer than what I began with!
>
>  _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla