[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Black Plastic

To: tesla list <tesla@xxxxxxxxxx>
Subject: [TCML] Black Plastic
From: jhowson4@xxxxxxxxxxx
Date: Fri, 9 Dec 2011 13:57:07 +0000 (UTC)
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <1130362917.930545.1323438893727.JavaMail.root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hello everyone, 


I acquired a 1" OD length of black plastic from the machine shop here at college, I have no idea what it is. Its very hard, non translucent at its edges, not flexible. What is everyones opinion on it becoming a propeller gap spindle? 


Thanks, 
John "Jay" Howson IV 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Black Plastic
  - From: David Rieben
- Re: [TCML] Black Plastic
  - From: Jim Lux
- Re: [TCML] Black Plastic
  - From: Joe Mastroianni
- Re: [TCML] Black Plastic
  - From: Joe Mastroianni

Prev by Date: [TCML] Christmas SSTC Fun - We Three Kings
Next by Date: Re: [TCML] Black Plastic
Previous by thread: Re: [TCML] Tesla Hat
Next by thread: Re: [TCML] Black Plastic
Index(es):
- Date
- Thread