Re: [TCML] DdRSSTC driver board with parts

["Carlos Van Camp" <carlos@xxxxxxxxxxxxxxxxxxxxxx>]

Thanks,
I am definately interested in going down this path.
I am an electrical engineer with plenty of SGTC experience, but my 
experience with electronics is limited.
How difficult would it be for me to get a system running if I purchased a 
board from you?
I would most likely want to go with the CM1200's and run it to get 10-12 
foot arcs.
Do you have a design I could look at to see what would be involved?
Any idea of costs?

Thanks,
Carlos.
----- Original Message ----- 
From: "DC Cox" <resonance@xxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Saturday, November 06, 2010 9:48 PM
Subject: [TCML] DdRSSTC driver board with parts


> We recently completed testing on our our DRSSTC driver board design.  I 
> will
> have stuffed boards available in early Feb.
>
> The unit can be adjusted to work with Powerex CM300 (4-5 ft spark), CM600
> (6-8 ft spark, and even CM1200 wih spark lengths up to 16 feet.
>
> It has proven very robust and reliable as we use a fiber optic connection
> from modulator to main board.
>
> Precise adjustment of zero cross points can be set for each IGBT module 
> thus
> allowing near perfect efficiency!
>
> Dr. Resonance
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla