RE: [TCML] Grounding a Tesla Coil (Yes, Again)

["Richard Schmuke" <rdj@xxxxxxxxxxxx>]

As long as you have some soil it is easy to put a 10ft copper tubing in the
ground. Go to the plumbing dept and get a hose fitting, solder it on the end
of the tube, hook up a hose, hold it vertical and have someone turn on the
water and it will go in as deep as you want it to.
Remove the fitting and you are ready.
Rich ,KDØZZ

The likelyhood of damage to a component is inversely proportional to the
number you have available, and directly proportional to its cost.


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of jimlux
Sent: Tuesday, May 04, 2010 7:59 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Grounding a Tesla Coil (Yes, Again)


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla