Yep, hey Miles. Wish I was home more but if you're anywhere near Odessa,TX this week we could do lunch. Do hope we meet soon.
Forget the dentured term; have no idea where I got that from my notes. But I do have a big concern with the percent detuned my coil appears in JavaTC. Any suggestions?
Best Regards,
Miles
Sent from my iPhone
On Jul 8, 2010, at 2:57 AM, miles waldron<mileswaldron@xxxxxxxxxxx> wrote:
Hey Bart!
There are two Miles's on the list now. We are both in Atlanta too. I have not yet had the pleasure of meeting him.
Miles Waldron (in Atlanta)
On 7/7/2010 9:45 PM, bartb wrote:
Hi Miles,
What do you mean by the term "denture"?
Regards,
Bart
Miles Mauldin wrote:
I found the post below of interest as I had to recalculate my design
due to only having a 20" secondary winding instead of 22".
Unfortunately, I already had the primary built along with the topload.
Originally I had a computed denture of 4.21% high, but now the best I
can compute is in the low 50% range. Is this "detuned"? Or an awful
denture that I should consider starting over?
Best Regards,
Miles
Sent from my iPhone
On Jul 7, 2010, at 9:25 AM, Joe Mastroianni<joe@xxxxxxxxxxxxxx> wrote:
Hi Brandon,
For what it's worth, I run my coil in my garage or driveway. It's only
0.9KW input power, so much less output power, though I don't know
exactly how much less or how to measure it. As long as I don't run it
in some sort of awful detuned mode, I have zero interference with
household electronics.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla