[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Toroid height, What's best

To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Toroid height, What's best
From: nancylavoie@xxxxxxxxxxx
Date: Tue, 23 Feb 2010 22:35:21 +0000
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx
Sensitivity: Normal

I don't know that there are any guidelines for height but I can tell you this: On my six inch coil I got the idea of placing my 28 inch dryer duct toroid atop a 5" insulator.Looked great however the corona this produced was horrendous.Lowered the toroid to about an inch and a half and all was happy.Trial and error is what so much of what this hobby is all about. Wyatt
Sent from my Verizon Wireless BlackBerry
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Prev by Date: RE: [TCML] Re: Hot Primary
Next by Date: Re: Re: [TCML] Magnifier topics
Previous by thread: [TCML] Toroid height, What's best
Next by thread: RE: [TCML] Toroid height, What's best
Index(es):
- Date
- Thread