[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Terry Filter Question
They aren't all in series. The resistors, filter caps, and MOV's are
all in parallel with eachother along the HV line. look at some
pictures online, it should be pretty clear.
It goes:
NST-------MOV's---spark gap
\---Filter Caps---/
\---Resistor---/
On Feb 20, 2010, at 3:49 PM, otmaskin5@xxxxxxx wrote:
The circuit diagrams for NST protection that I have seen have the
components in this order:
NST hot...to MOVs & bypass capacitors...to the 1K Ohm resistor (in
series)...to the main spark gap
My question is whether the placement of the resistor is critical
within the order of the components. In other words, would the
components work in this order:
NST hot...to 1K Ohm resistor (in series)...to MOVs & bypass
caps...to the main spark gap.
The current project I'm working on has space limitations & a less
that optimal layout of the lower deck components (poor planning on
my part - doh!). The second option would allow for more direct
layout of the primary circuit wiring and save me some work in the
process. I'd appreciate any advice as to whether this would work
properly.
Thanks, Dennis Hopkinton MA
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla