[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Determining wire gauge?

To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Subject: [TCML] Determining wire gauge?
From: <mrapol@xxxxxxxxxxxx>
Date: Wed, 1 Dec 2010 11:18:40 -0500
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Is there a reliable method for determining the size of unknown magnet wire?I have access to a supply, but I don't know what the gauge is. It's verythin, probably in the 30s, from electric motor windings.

PBT

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- RE: [TCML] Determining wire gauge?
  - From: Richard Schmuke
- Re: [TCML] Determining wire gauge?
  - From: jimlux
- RE: [TCML] Determining wire gauge?
  - From: Phil Tuck

Prev by Date: [TCML] Pulsed Royer SSTC at 390 Vdc in
Next by Date: Re: [TCML] Determining wire gauge?
Previous by thread: [TCML] Pulsed Royer SSTC at 390 Vdc in
Next by thread: RE: [TCML] Determining wire gauge?
Index(es):
- Date
- Thread