[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] method of routing secondary wire to toroid
The double toroid I put together is sandwiched on an 8 inch 1/4" threaded rod and secured with lock nuts. This allow me to not only raise and lower both toroids but also the ability to alter the spacing beween the toroids.
Miles
Craig wrote:
> Hi all,
>
>
...>
> Another consideration is allowing the toroid height to be adjustable, while
> still having a robust connection.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla