[TCML] (no subject)

[mike osipowicz <yosip1115@xxxxxxxxxxx>]

hello everyone, Ive got a static gap coil, and upgraded to a rotary motor gap. I tried it asynch, with descent results, not as good as the static gap, so I ground flats on the rotor, and the motor sounded in sync. I hooked it up to the coil, and the results still arent as good as with the static gap. it is a 1700 rpm motor, with 12, or 6 contacts on the rotor, and 2 stationary. any ideas to optimize the performance? thanks,                                                                                   Mike o.
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/171222984/direct/01/_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla