Hi Herr Zapp,
Interesting questions, but how do they relate to answering the question
Dave asked?
Matt D.
-----Original Message-----
From: Quarkster <quarkster@xxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Mon, Sep 14, 2009 4:36 pm
Subject: Re: [TCML] Looking for pulse cap
Dave -?
?
A few questions:?
?
1. How are you calculating the voltage requirements for the tank cap??
?
2. How large a multiplier are you using to define the capacitor's voltage
margin (safety factor)??
?
3. What is the manufacturer's voltage rating for the IGBTs you will be
using??
?
4. What is the calculated peak primary current??
?
Regards,?
Herr Zapp?
----- Original Message ----- From: "Dave Leddon" <dave@xxxxxxxxxx>?
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>?
Sent: Monday, September 14, 2009 11:19 AM?
Subject: [TCML] Looking for pulse cap?
?
Hi all,?
?
? I'm working on a fairly large DRSSTC and I find that an MMC adequate to
?the task may be out of my financial reach. If I were to push the igbt
?bridge to its limits I would require a cap rated at 20 kv at 0.5 mfd.
?This begins to sound like pole pig territory. If anyone has a cap like
?this that they would consider selling, or if they know of a resource that
?I can pursue, please let me know.?
?
Thanks,?
Dave?
Pleasanton, Ca?
?
_______________________________________________?
Tesla mailing list?
Tesla@xxxxxxxxxxxxxx?
http://www.pupman.com/mailman/listinfo/tesla ?
_______________________________________________?
Tesla mailing list?
Tesla@xxxxxxxxxxxxxx?
http://www.pupman.com/mailman/listinfo/tesla?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla