Re: [TCML] SSTC Coupling

["Dex Dexter" <dexterlabs@xxxxxxxxxxx>]

Why do you think  Rspark = 220 kOhm is a realistic figure for SSTC ?

Dex  


--- gbmorris@xxxxxxxxx wrote:

From: Greg Morris <gbmorris@xxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] SSTC Coupling
Date: Mon, 26 Oct 2009 19:43:43 -0300

So in other words my C_TERM should be shorted, and C_TERM_TO_GND should have
the value of the current C_TERM?

Thanks,
Greg

2009/10/26 Antonio Carlos M. de Queiroz <acmdq@xxxxxxxxxx>

> Greg Morris wrote:
>
>> My circuit
>> model can be found here,
>> http://picasaweb.google.com/GBMorris/Tesla#5396152968071832514 , and has
>> been largely borrowed from Figure 8-1 of Tilbury's book on Tesla Coil
>> Design.
>>
>>
> The terminal capacitance should be in parallel with the secondary
> capacitance, not in series, with the load connected to both.
>
> Antonio Carlos M. de Queiroz
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
Greg Weyrich Morris
VP External - Engineering Undergraduate Society
B.Sc. Electrical Engineering (Final Year)
University of New Brunswick
G.B.Morris@xxxxxx
www.unb.ca/robotics



_____________________________________________________________
Washington DC's Largest FREE Email service. ---> http://www.DCemail.com ---> A Washington Online Community Member --->
http://www.DCpages.com
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla