RE: [TCML] welder for a ballast........

[david baehr <dfb25@xxxxxxxxxxx>]

Thanks !!!   ,,,I  didnt think it would heat up so quickly, even with lots of airflow. I was just gonna run it off & on for da tricks or treaters.....

 

        Now, how much overload can my 10kva take ?  (thats like 42 amp ,24/7 ? ) It should handle double that a minute or two at a time,..maybe more ?  but seems to pullin' 60-70 amp with the welder on max,...and thats enough :-)  Im on a 50amp breaker, but never tripped it..

 

     yea,..i could back off the welder,...but i  love thoese white, thick, 12" plus arcs !
 
> From: danniken@xxxxxxxxxxx
> To: tesla@xxxxxxxxxx
> Subject: Re: [TCML] welder for a ballast........
> Date: Sun, 18 Oct 2009 21:58:20 -0700
> 
> david baehr wrote:> > how much abuse can this take ?? :=0 Two welders,
> > set at 50% - 70% would prob be ideal.??.................... 
> 
> I also have that welder; here is the duty cycle chart for that model:
> 
> http://i38.tinypic.com/sy9rep.jpg
> 
> Jon
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
 		 	   		  
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/171222985/direct/01/_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla