[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TCML] Re: Maxwell HV Caps on the bay...
Hey all,
There is a seller called surplussupply or surplussupplytx on epay
with a load of Maxwell 50KV & 75KV caps for sale right now. Seller has a
large quantity and they are going for around a dollar per KV... thats cheap
cheap cheap. Take care, Jerry
On Thu, Nov 5, 2009 at 1:00 PM, <tesla-request@xxxxxxxxxx> wrote:
> Send Tesla mailing list submissions to
> tesla@xxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.pupman.com/mailman/listinfo/tesla
> or, via email, send a message with subject or body 'help' to
> tesla-request@xxxxxxxxxx
>
> You can reach the person managing the list at
> tesla-owner@xxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Tesla digest..."
>
> Today's Topics:
>
> 1. RE: More things for sale (Nick Andrews)
> 2. Re: More things for sale (John Forcina)
> 3. small coil (Gates Larocque)
> 4. Re: maxwell capacitor for sale (Roger Smith)
> 5. RE: mini Tesla coil specs (Lau, Gary)
> 6. Funny DANGER sign (Lau, Gary)
> 7. Re: Funny DANGER sign (Tim Flood)
>
>
> ---------- Forwarded message ----------
> From: Nick Andrews <nicothefabulous@xxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Date: Wed, 4 Nov 2009 13:53:59 -0500
> Subject: RE: [TCML] More things for sale
>
> I was in New Orleans one time, walking along the river at the Quarter. I
> found the remains of the old Flamingo (fake riverboat casino) neon sign
> laying strewn over the ground. I salvaged two of these units, wish I had
> gotten them all. I think there were at least a dozen of them. All of the
> neon tubes had been broken, but the transformers were laying all over.
> Nice, compact little suckers, great for portable stuff.
>
> Nick A
>
>
>
>
> > Date: Wed, 4 Nov 2009 12:29:57 -0500
> > From: forcijo10@xxxxxxxxx
> > To: tesla@xxxxxxxxxx
> > Subject: [TCML] More things for sale
> >
> > HI all, i have 6 NIB insulators made by Reuel.inc They are 19" long and
> > 5.5" wide with 3/4" grooves. I am almost certain they are made from
> > cycloaliphatic epoxy and they are very strong heat resistant. I tested
> that
> > by putting a blowtorch to one for about 10 seconds and there was no
> effect
> > except for a little discoloration. Here are some pictures:
> > http://farm3.static.flickr.com/2638/4074847345_3c05ba5220_b.jpg
> > http://farm3.static.flickr.com/2500/4075621056_bde79e0e4c_b.jpg
> > http://farm4.static.flickr.com/3485/4075622284_44c29cbf04_b.jpg
> > I am asking $8+shipping.
> >
> > I have a 6kv 30ma NST mid point grounded non GFCI protected for sale
> also.
> > I tested it with my HV probe and it has just under 3kv across each side
> of
> > the secondary.
> > Datasheet and pictures:
> > http://www.franceformer.com/products-neon/data%20sheet/P2G_P2_P4.pdfmodel#
> > 6030 P2G except this one has a 120v primary as apposed to the 277v
> primary
> > in the datasheet
> > Pictures,
> > http://elektritek.com/nst/DSCN6213.JPG
> > http://elektritek.com/nst/DSCN6212.JPG
> > http://elektritek.com/nst/DSCN6208.JPG
> >
> > It is a great little nst for a first coil. I am asking $12+ shipping.
> >
> > Contact me off list if interested.
> >
> > Thanks, John
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
>
> _________________________________________________________________
> Hotmail: Trusted email with Microsoft's powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/177141664/direct/01/
> http://clk.atdmt.com/GBL/go/177141664/direct/01/
>
>
>
> ---------- Forwarded message ----------
> From: John Forcina <forcijo10@xxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Date: Wed, 4 Nov 2009 15:29:55 -0500
> Subject: Re: [TCML] More things for sale
> Just as a note, it is $8 per insulator as some people may get confused with
> that.
>
> On Wed, Nov 4, 2009 at 1:53 PM, Nick Andrews <nicothefabulous@xxxxxxxxxxx
> >wrote:
>
> >
> > I was in New Orleans one time, walking along the river at the Quarter. I
> > found the remains of the old Flamingo (fake riverboat casino) neon sign
> > laying strewn over the ground. I salvaged two of these units, wish I had
> > gotten them all. I think there were at least a dozen of them. All of
> the
> > neon tubes had been broken, but the transformers were laying all over.
> > Nice, compact little suckers, great for portable stuff.
> >
> > Nick A
> >
> >
> >
> >
> > > Date: Wed, 4 Nov 2009 12:29:57 -0500
> > > From: forcijo10@xxxxxxxxx
> > > To: tesla@xxxxxxxxxx
> > > Subject: [TCML] More things for sale
> > >
> > > HI all, i have 6 NIB insulators made by Reuel.inc They are 19" long
> and
> > > 5.5" wide with 3/4" grooves. I am almost certain they are made from
> > > cycloaliphatic epoxy and they are very strong heat resistant. I tested
> > that
> > > by putting a blowtorch to one for about 10 seconds and there was no
> > effect
> > > except for a little discoloration. Here are some pictures:
> > > http://farm3.static.flickr.com/2638/4074847345_3c05ba5220_b.jpg
> > > http://farm3.static.flickr.com/2500/4075621056_bde79e0e4c_b.jpg
> > > http://farm4.static.flickr.com/3485/4075622284_44c29cbf04_b.jpg
> > > I am asking $8+shipping.
> > >
> > > I have a 6kv 30ma NST mid point grounded non GFCI protected for sale
> > also.
> > > I tested it with my HV probe and it has just under 3kv across each side
> > of
> > > the secondary.
> > > Datasheet and pictures:
> > >
> http://www.franceformer.com/products-neon/data%20sheet/P2G_P2_P4.pdfmodel#
> > > 6030 P2G except this one has a 120v primary as apposed to the 277v
> > primary
> > > in the datasheet
> > > Pictures,
> > > http://elektritek.com/nst/DSCN6213.JPG
> > > http://elektritek.com/nst/DSCN6212.JPG
> > > http://elektritek.com/nst/DSCN6208.JPG
> > >
> > > It is a great little nst for a first coil. I am asking $12+ shipping.
> > >
> > > Contact me off list if interested.
> > >
> > > Thanks, John
> > > _______________________________________________
> > > Tesla mailing list
> > > Tesla@xxxxxxxxxx
> > > http://www.pupman.com/mailman/listinfo/tesla
> >
> > _________________________________________________________________
> > Hotmail: Trusted email with Microsoft's powerful SPAM protection.
> > http://clk.atdmt.com/GBL/go/177141664/direct/01/
> > http://clk.atdmt.com/GBL/go/177141664/direct/01/
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
>
>
>
> ---------- Forwarded message ----------
> From: Gates Larocque <gateslarocque@xxxxxxxxxxx>
> To: Tesla List <tesla@xxxxxxxxxx>
> Date: Thu, 5 Nov 2009 06:30:45 -0500
> Subject: [TCML] small coil
>
> I want to build a small single mot coil any plans for such a coil would be
> appreciated.
>
> Gates
>
> _________________________________________________________________
> Windows Live: Make it easier for your friends to see what you’re up to on
> Facebook.
> http://go.microsoft.com/?linkid=9691816
>
>
> ---------- Forwarded message ----------
> From: "Roger Smith" <rwsmith@xxxxxxxxxxxxxx>
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Date: Thu, 5 Nov 2009 05:23:03 -0500
> Subject: Re: [TCML] maxwell capacitor for sale
> I have been running low pulse rate Maxwell capacitors on my coil but I run
> them in groups of two in series and they work fine. Four of them are .03uf
> at 35kv and the other four are .04uf at 100kv. If John had two of those
> capacitors for $120.00 each I would buy them both. In any case, $120.00
> is a darn good price and it might be worth taking a chance with it as long
> as you don't try to push it too hard.
>
> Roger
> ----- Original Message ----- From: "Travis Tabbal" <travis@xxxxxxxxxx>
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>; <forcijo10@xxxxxxxxx>
> Sent: Wednesday, November 04, 2009 11:08 AM
> Subject: Re: [TCML] maxwell capacitor for sale
>
>
> I might be interested, but the rep rate is listed as 100 ppm in the
>> datasheet. Isn't that too low for TC use? If this will hold up to a 14kV
>> pig
>> powered coil, w/ARSG I'll buy it. Anyone on the list care to comment? If
>> I'll just blow it up, I'll pass. Cleaning up oil and other capacitor
>> debris
>> isn't fun. :)
>>
>>
>>
>> On Wed, Nov 4, 2009 at 8:51 AM, John Forcina <forcijo10@xxxxxxxxx> wrote:
>>
>> HI all, i have a .13uf 40kvdc maxwell capacitor that i no longer need and
>>> i
>>> decided to sell it. It was previously used in a pulse laser setup. I
>>> tested it with a capacitance meter and it reads .14uf
>>> Here are some pictures and a datasheet of it:
>>> Datasheet: http://elektritek.com/31826.pdf
>>> http://farm3.static.flickr.com/2698/4075442636_cbc41a0b9c_b.jpg
>>> http://farm3.static.flickr.com/2782/4075441712_f6a853028b_b.jpg
>>> I am asking $120+shipping for it. The capacitor is guaranteed not to be
>>> DOA. Please contact me off list if interested.
>>>
>>> Thanks, John
>>> _______________________________________________
>>> Tesla mailing list
>>> Tesla@xxxxxxxxxx
>>> http://www.pupman.com/mailman/listinfo/tesla
>>>
>>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>>
>
>
>
> ---------- Forwarded message ----------
> From: "Lau, Gary" <Gary.Lau@xxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Date: Thu, 5 Nov 2009 14:45:26 +0000
> Subject: RE: [TCML] mini Tesla coil specs
> Hi Shawn,
>
> I don't know that I've ever heard of a Tesla coil operating with a voltage
> as low as 2kV. I'm not saying it can't be done, but you'd be plumbing new
> depths there. Definitely use a single static gap, with direct airflow thru
> the gap. Using the 5/60 unit is certainly the better option.
>
> For small coils, you really want high inductance secondaries (and
> primaries). I'd choose the 28 AWG wire, or finer.
>
> Regards, Gary Lau
> MA, USA
>
> > -----Original Message-----
> > From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> > Behalf Of Shaun Epp
> > Sent: Tuesday, November 03, 2009 6:26 PM
> > To: tesla@xxxxxxxxxx
> > Subject: [TCML] mini Tesla coil specs
> >
> > Hello Group,
> >
> > I have two smaller transformers and I would like to make a table top
> (portable) coil
> > out of one of them. I have a 2kv, 60ma open transformer that was made
> for spark
> > gap operation, I also have a 5kv, 60ma NST - the old fashion style.
> > Have other people build tesla coils at these low voltages, are there any
> special
> > requirement? for magnet wire I have a large roll of 26 gauge and a
> smaller roll of
> > 28 gauge wire, some pvc pipe (the white stuff), capacitors.....etc.
> >
> > any input would be apreatiated!
> >
> >
> > thanks,
> >
> > Shaun
>
>
>
> ---------- Forwarded message ----------
> From: "Lau, Gary" <Gary.Lau@xxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Date: Thu, 5 Nov 2009 15:16:15 +0000
> Subject: [TCML] Funny DANGER sign
> Someone in the office had a funny photograph of a sign outside their
> office. It read:
>
> DANGER
> Do Not Touch.
> Not only will this kill you, it will
> hurt the whole time you're dying.
>
> My coil needs one of these.
>
> Regards, Gary Lau
> MA, USA
>
>
>
> ---------- Forwarded message ----------
> From: "Tim Flood" <tflood@xxxxxxxxxxx>
> To: "Tesla List" <tesla@xxxxxxxxxx>
> Date: Thu, 5 Nov 2009 10:53:47 -0500
> Subject: [TCML] Re: Funny DANGER sign
> Thanks Gary, I really needed that.
>
>
> Tim Flood
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>
--
"FREEDOM"=The result of intention and action against tyranny. "Live Free -
Be Free"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla